The 2020 Hyundai Venue has reported several brake problems, including a faulty brake pedal design that can lead to braking failure, brake pedal vibration/shuddering indicating issues with components like pads and rotors, and driver assistance system defects causing unintended acceleration or deceleration.
Potential causes include a design flaw with the brake pedal height, worn brake components, and malfunctioning driver aids. To fix these issues, inspecting and replacing faulty brake parts, adjusting pedal positioning, and addressing any software glitches in driver assistance systems may be required. Proper diagnosis and repairs by trained technicians are recommended for safety.
Symptoms
Brake Pedal Issues
- The brake pedal is designed in a way that the driver’s foot can get trapped under it, potentially leading to braking failure and increased risk of collision.
- There are complaints of the brake pedal being extremely hard and stiff after the vehicle has been sitting for a while.
- Brake pedal vibration or shuddering can occur, which may be caused by issues with brake pads, rotors, calipers, or other brake components.
Driver Assistance System Defects
- The lane keep assist system can malfunction, causing the vehicle to veer off the road into oncoming traffic.
- The adaptive cruise control system may fail, leading to sudden drops in vehicle speed while cruising.
Other Brake Problems
- Dim headlights and taillights, compromising night vision and increasing crash risk.
- Power steering failure resulting in loss of steering control.
- Instances of airbag non-deployment reported.
Recalls
- One recall related to seat belt pretensioners that may explode during deployment, potentially causing injury from flying metal shards.
Potential Causes
Brake Pedal Design Flaw
One of the major issues highlighted is a design flaw with the brake pedal. The brake pedal is positioned higher than the accelerator pedal, which can cause the driver’s foot to get trapped underneath it. This can potentially lead to braking failure and increase the risk of collisions.
Brake Pedal Vibration/Shuddering
Another commonly reported problem is brake pedal vibration or shuddering during braking or even when not applying the brakes at low speeds. This could be caused by issues with brake pads, rotors, calipers, or other brake components.
Hard/Stiff Brake Pedal
There are complaints about the brake pedal becoming extremely hard and stiff after the vehicle has been sitting for a while.
Driver Assistance System Defects
Defects in the driver assistance systems like lane keep assist and adaptive cruise control have also been reported. These can cause the vehicle to veer off the road or experience sudden drops in speed, increasing the risk of collisions.
How to Diagnose Brake Issues in Your 2020 Hyundai Venue?
Here are some potential steps to diagnose brake issues in a 2020 Hyundai Venue:
1. Check for Brake Pedal Problems
- Check if the brake pedal gets trapped under the accelerator pedal – This design flaw can potentially lead to braking failure.
- Verify if depressing the brake pedal all the way initiates proper braking.
- Look for any brake pedal vibration/shuddering which could indicate issues with brake pads, rotors, calipers etc.
2. Inspect Brake Components
- Check brake pads for excessive wear and replace if needed. Listen for any squealing noises which indicate worn pads.
- Inspect brake rotors for uneven wear, scoring or warping which can cause vibration and pulling to one side.
- Ensure brake calipers are operating smoothly and not sticking, which can cause premature pad wear, vibration and smell.
- Check brake fluid level and condition – contaminated or low fluid can cause brake issues.
3. Check for Other Issues
- Test driver assistance systems like lane keep assist and adaptive cruise control for any malfunctions.
- Verify proper operation of headlights, taillights, power steering and airbags.
- Look for any diagnostic trouble codes related to the braking system using an OBD2 scanner.
How to Fix 2020 Hyundai Venue Brake Problems– Step by step
Step 1: Inspecting the Brake Pedal
- Check the brake pedal feel – If it feels extremely hard or stiff after the vehicle has been sitting, this seems to be considered normal by Hyundai, but is still worth investigating.
- Verify if the brake pedal gets trapped under the accelerator pedal due to the design flaw. This can potentially lead to braking failure.
- Check if depressing the brake pedal all the way initiates proper braking.
- Look for any brake pedal vibration or shuddering, which could indicate issues with brake components.
Step 2: Inspecting Brake Components
- Check brake pads for excessive wear and replace if needed. Listen for squealing noises indicating worn pads.
- Inspect brake rotors for uneven wear, scoring, or warping, which can cause vibration and pulling.
- Ensure brake calipers are operating smoothly and not sticking, which can cause premature pad wear, vibration, and smell.
Step 3: Checking for Other Issues
- Test driver assistance systems like lane keep assist and adaptive cruise control for malfunctions.
- Verify proper operation of headlights, taillights, power steering, and airbags.
- Use an OBD2 scanner to check for any diagnostic trouble codes related to the braking system.
Repairing 2020 Hyundai Venue Brake Problems: DIY or Professional Help?
When it comes to repairing brake problems on a 2020 Hyundai Venue, seeking professional help from a mechanic is generally recommended over attempting a DIY repair for several reasons:
- Expertise and Proper Diagnosis
Professional mechanics have the knowledge, experience, and specialized tools to accurately diagnose and fix brake issues. Brake systems, especially in modern vehicles, can be complex, and an improper diagnosis or repair could lead to further damage or safety hazards. - Access to Specialized Tools and Equipment
Certain brake repairs, such as resurfacing rotors or bleeding brake lines, require specialized tools and equipment that most DIYers may not have access to. Professional mechanics have the necessary tools to perform these tasks correctly. - Safety Considerations
Brakes are a critical safety component of a vehicle, and any mistakes or oversights during a DIY repair could compromise the braking system’s performance, putting you and others at risk. Professional mechanics follow strict safety protocols to ensure the vehicle is safe to drive after repairs. - Warranty Coverage
Professional brake repairs typically come with a warranty, providing peace of mind and protection against any potential issues that may arise after the repair.
2020 Hyundai Venue Brake Problems Repairing Cost
Here are some key points regarding the potential repair costs for brake problems on the 2020 Hyundai Venue:
Brake Pad Replacement Cost
- According to RepairPal, the average cost for a brake pad replacement on a Hyundai Venue is between $280 and $298. This includes both parts (around $209) and labor ($70-$89).
- An estimate from AutoZone shows brake pads for the 2020 Venue cost around $55.99 for the front pads.
- A dealership like Coggin DeLand Hyundai may charge higher prices for OEM brake pad replacement on the 2020 Venue.
Brake Rotor Replacement Cost
- Replacing all four brake rotors on the 2020 Venue can cost between $300 to $750, including labor, according to Larry Miller Hyundai.
Other Potential Brake Repair Costs
- Replacing the brake master cylinder can cost $356-$377.
- Brake booster replacement is estimated at $470-$520.
- Rear brake shoe replacement is around $187-$215.
Preventing Future Brake Problems in 2020 Hyundai Venue
- Get the Battery Checked Regularly
Have the battery tested periodically, especially if you notice any signs of battery weakness like slow engine cranking or electrical issues. Hyundai recommends getting the battery checked every time you visit for service. - Keep the Battery Charged
Don’t let the vehicle sit unused for extended periods without driving it or using a battery tender/charger. Letting the battery go uncharged can cause it to sulfate and fail prematurely. - Avoid Excessive Accessory Use
The “Battery Discharge Warning” seems to trigger when using accessories like the radio/music with the engine off for more than 10-15 minutes. Limit accessory use without the engine running. - Check Battery Connections
Ensure the battery terminals and cable connections are clean and tight. Corrosion or loose connections can prevent proper charging. - Consider the Battery Reset Switch
Some Hyundai models have a 12V battery reset switch that can reconnect the battery if it automatically disconnects due to abnormal draining when parked. - Replace Battery on Schedule
Hyundai batteries typically last 3-5 years. Replace the battery proactively within this timeframe to avoid being stranded by a dead battery. - Use a Battery Tender for Storage
If storing the Venue for extended periods, use a battery tender/maintainer to keep the battery at a full state of charge. - Check for Electrical Drains
If the battery keeps going dead, have a mechanic check for any electrical issues or parasitic drains that could be depleting the battery when parked.
Can I drive my 2020 Hyundai venue with a malfunctioning brake?
No, you should absolutely not drive your 2020 Hyundai Venue if there is a brake malfunction. The brakes are a critical safety system, and driving with faulty brakes puts you and others at serious risk of an accident.
If you experience any brake issues like a soft/spongy pedal, pulling to one side under braking, unusual noises, or the brake warning light is on – you should not drive the vehicle.