2020 Hyundai Venue Jump Start Problems, Symptoms, Causes and How to Fix

The 2020 Hyundai Venue may experience jump start problems due to a failing battery, with symptoms like slow starting, clicking noises, and electronics functioning without engine turnover. Corrosion on terminals and dash warning lights are also indicators[2]. To fix, replace the battery, ensuring proper installation by a dealer, especially as hood space has decreased in newer models[2]. Regular maintenance and avoiding draining the battery by leaving accessories on can prevent issues[2].

Symptoms

Common symptoms of jump start problems in the 2020 Hyundai Venue include:

  • No Crank/No Start: The vehicle makes no sound when attempting to start with the key[3].
  • Clicking or Whirring Noises: These sounds occur without the engine turning over[3].
  • Rough Idling or Stalling: This typically happens in the morning and resolves shortly after starting[2].
  • Dimming Lights or Electrical Issues: Indicative of a failing battery[3].
  • Swollen Battery Case: A physical sign that the battery may be failing[3].
  • Battery Warning Light: Illuminated on the dashboard, indicating issues with the battery[3].
  • Slow Engine Crank: The engine takes longer than usual to start[3].
  • Electronics Function but Engine Won’t Turn Over: Electrical components may work, but the engine does not start[3].

Potential Causes

The causes of jump start problems in the 2020 Hyundai Venue can be attributed to a variety of factors:

  • Defective Factory Batteries: While less common, some vehicles may have factory defects in their batteries[3].
  • Driving Habits: Short trips that don’t allow the battery to fully recharge can lead to sulfation and acid stratification, which are detrimental to battery health[3].
  • Electrical Issues: Parasitic drains from excessive electrical accessories, loose or corroded battery connections, or a malfunctioning alternator can prevent proper charging[4].
  • Cold Weather: Low temperatures can increase the strain on the battery, making it harder to start the vehicle[3].
  • Battery Age: Car batteries typically last between 3-5 years, and as they age, their ability to hold a charge diminishes[3].
  • Improper Battery Size or Application: Using a battery that is not properly sized or designed for the specific vehicle can lead to starting issues[4].

How to Diagnose Jump Start Issues in Your 2020 Hyundai Venue?

To diagnose jump start issues in your 2020 Hyundai Venue, follow these steps:

  1. Check the Battery Indicator: If your battery has an indicator light, a green color means the battery charge is good, while red indicates it needs charging[1].
  2. Use a Multimeter: Set the multimeter to measure voltage and check the battery’s voltage. A healthy battery should read between 12.4V and 12.7V. Readings higher than this may suggest an alternator issue, while lower readings can indicate a failing battery[1].
  3. Inspect for Corrosion: Look for any corrosion on the battery terminals, as this can affect the battery’s performance. Clean any corrosion found to ensure good contact[1].
  4. Check Battery Fluid Level: If your battery is not sealed, check the fluid level. Top up if necessary, following safety guidelines to avoid acid burns[1].
  5. Perform a Load Test: Observe if the headlights or interior lights dim when you attempt to start the vehicle. Dimming lights can indicate a weak battery[1].
  6. Examine the Alternator and Voltage Regulator: These components are crucial for charging the battery. Faults here can lead to poor battery charging and performance[1].
  7. Battery Replacement: If tests indicate the battery is failing, consider replacing it. Ensure you choose a battery that matches the specifications in your owner’s manual and is no more than six months old from the date of manufacture to ensure maximum lifespan and performance[1].

How to Fix 2020 Hyundai Venue Jump Start Problems– Step by step

To fix jump start problems in a 2020 Hyundai Venue, follow these step-by-step instructions:

  1. Check Warning Lights: Look for any dashboard warning lights that indicate issues with the battery, alternator, or electrical system. These can provide the first clue about what might be wrong[5][6].
  2. Inspect the Battery: Use a multimeter to check the battery voltage. A healthy battery should show a voltage between 12.4V and 12.7V. If the voltage is lower, the battery may be drained or failing[7].
  3. Listen for Noises: When attempting to start the car, listen for any clicking sounds. A single click can indicate a problem with the starter, while repeated clicking usually points to a battery issue[6].
  4. Check for Drained Battery: Look for signs that the battery has been drained, such as interior lights that were left on or accessories that were used while the car was off[6].
  5. Battery and Terminal Inspection: Clean any corrosion from the battery terminals and ensure that all connections are secure. This can improve the electrical connection and help in starting the vehicle[7].
  6. Alternator Check: Verify the operation of the alternator. If the alternator is faulty, it won’t charge the battery properly, leading to repeated drain issues[6].
  7. Diagnose Electrical Shorts: If the jump start issues are intermittent, consider the possibility of an electrical short or parasitic drain. These might require more detailed diagnostics with specialized equipment[7].
  8. Consult a Dealer: For complex issues, especially intermittent ones, visiting a dealer or a professional mechanic who can perform a detailed diagnostic with computer scans is advisable[5][6].
  9. Transmission Check: If the vehicle has transmission issues, these can sometimes manifest as starting problems. This is less common but should be considered if other diagnostics do not resolve the issue[6].
  10. Use the Battery Reset Switch: If all else fails, the 2020 Hyundai Venue is equipped with a 12-volt battery reset switch. This can be used to reset the battery and electrical system, potentially resolving the issue. The switch is located on the panel to the left side of the steering wheel[8].

Repairing 2020 Hyundai Venue Jump Start Problems: DIY or Professional Help?

When deciding whether to address 2020 Hyundai Venue jump start problems through DIY methods or professional help, consider the following:

  • DIY Approach: If the issue is a simple battery replacement and the vehicle is still under warranty, a DIY approach may be feasible. Owners comfortable with basic battery checks and replacements can consider this option, especially since warranty coverage may apply to the battery[5][10].
  • Professional Diagnosis: For more complex issues beyond a straightforward battery replacement, professional diagnosis is advisable. The electrical systems in modern vehicles can be intricate, and improper handling can lead to further damage. A general diagnosis cost at a professional service center ranges between $88 and $111, which is a reasonable investment for accurate troubleshooting[9].
  • Starter Replacement: If the starter motor is the culprit, replacement costs average between $470 and $507. This task involves electrical systems and engine components, which may be best handled by a professional to ensure correct installation and function[11].
  • Complex Electrical Issues: Some owners have reported complex electrical issues that were not immediately apparent, indicating that professional diagnostic tools and expertise may be necessary to identify and resolve the root cause[1][4][6].
  • Warranty Considerations: For newer vehicles still under warranty, it’s beneficial to have the dealership address the issue to ensure that any repairs are covered and do not void the warranty[5].

2020 Hyundai Venue Jump Start Problems Repairing Cost

Repairing jump start problems in a 2020 Hyundai Venue can involve several potential costs depending on the root cause of the issue:

  • Battery Replacement: The cost for a new battery can range from approximately $100 to $300[7][11].
  • Alternator Replacement: If the alternator is the issue, replacement costs can vary between $400 and $1000, which includes both parts and labor[10].
  • Starter Replacement: For a failed starter, the replacement cost is estimated to be between $470 and $507, including parts and labor[14].
  • Electrical System Diagnosis: To diagnose potential shorts or wiring issues that could be draining the battery, the cost for a diagnosis is typically between $88 and $111[9].

Preventing Future Jump Start Problems in 2020 Hyundai Venue

To prevent future jump start problems in your 2020 Hyundai Venue, follow these guidelines:

  1. Avoid Leaving Accessories On: The Venue features a “Battery Discharge Warning” that alerts you when the battery is draining due to accessories like the radio being left on while the engine is off. Avoid leaving accessories on for more than 10-15 minutes without the engine running to prevent battery drain.
  2. Regular Starting and Running: If your Venue will be idle for an extended period, start and run the vehicle at least once or twice a week. This helps the alternator recharge the battery and keeps the battery healthy.
  3. Check and Clean Battery Connections: Ensure that the battery connections are tight and free from corrosion. A clean and secure connection prevents power loss and extends the battery’s life.
  4. Battery Maintenance and Testing: Regularly test your battery to monitor its health and output. Hyundai batteries typically last 3-5 years, but this can vary based on usage, climate, and other factors.
  5. Use of Battery Reset Switch: If you encounter persistent battery issues, the 2020 Venue is equipped with a battery reset switch. This can be used to reset the electrical system and resolve some battery-related problems.

Can I drive my 2020 Hyundai Venue with a malfunctioning Jump Start?

It is generally not recommended to drive your 2020 Hyundai Venue if it is experiencing jump start problems, such as a malfunctioning battery or alternator issues. 

it is advisable to address the root cause of the jump start problems before continuing to drive the vehicle. Have the vehicle inspected and repaired by a professional to ensure all components are functioning correctly and safely. This approach helps prevent potential breakdowns and maintains the vehicle’s reliability and safety.

Recent Posts