2020 Hyundai Venue Starting problems, Symptoms, Causes and How to Fix

The 2020 Hyundai Venue may experience starting problems due to various reasons including a dead battery, corrosion on battery terminals, faulty fuel pump, bad spark plugs, or a defective starter motor. Symptoms of starting issues can range from the engine not cranking, making clicking noises, to the car not responding to the push start button. To fix these problems, it’s essential to diagnose the exact cause. This may involve checking the battery’s health, cleaning or replacing corroded terminals, inspecting the fuel pump and spark plugs, or troubleshooting the starter motor. In some cases, professional mechanic intervention or a visit to a Hyundai service center may be necessary.

2020 Hyundai Venue Common Starting problems

The 2020 Hyundai Venue commonly experiences starting problems due to:

1. A dead or corroded battery.
2. An alternator problem.
3. A failed starter.

Symptoms

For the 2020 Hyundai Venue, starting problems and their symptoms include:

• Engine trouble starting or continuing to run, potentially due to worn spark plugs and plug wires.
• Trouble starting, idling rough, or a sudden change in throttle pedal position, indicating a possibly faulty mass airflow sensor (MAF).
• Aftermarket items like alarms or exhaust systems not installed properly can drain the battery or trigger the check engine light, hindering the vehicle from starting.
• Intermittent response to the push start button, with the car not going to ignition or cranking, possibly due to an electrical short.
• Rough idle on the first start of the day, lasting about 15 seconds.

Potential Causes

Potential causes of starting problems in the 2020 Hyundai Venue include:

1. Electrical shorts, which may intermittently affect the push start button functionality.
2. Faulty or dead battery, preventing adequate power supply to start the engine.
3. Issues with the starter motor or its connections.
4. Corrosion on battery terminals, which can impede electrical conductivity.
5. Faulty alternator, leading to poor battery charging and power issues.
6. Rodent damage to wiring, which can affect electrical systems and starting capability.

How to Diagnose Starting Issues in Your 2020 Hyundai Venue?

To diagnose starting issues in your 2020 Hyundai Venue, follow these steps:

1. Check the Battery: Begin with the most common cause, a dead or weak battery. Perform a voltage test to measure the voltage between the battery poles, check the acid level, and assess the condition of the starter battery. A multimeter can be used to precisely measure the battery’s voltage, which should result in values of approximately 12 to 13 volts.
2. Inspect for Corrosion on Battery Terminals: Look for any signs of corrosion on the battery terminals, as this can impede electrical conductivity and prevent the car from starting.
3. Evaluate the Key Fob Battery: A weak key fob battery can also cause starting problems. Ensure the key fob battery is not depleted.
4. Check the Starter Motor: A broken starter motor can prevent the engine from cranking. Inspect the starter motor for any signs of failure.
5. Look for Rodent Damage: Inspect the engine compartment for any signs of rodent damage to cables and wires, which can affect vehicle systems such as the fuel supply, oil supply, or power supply.
6. Use On-Board Diagnostics (OBD): Hyundai Venue is equipped with OBD, which can provide initial indications of where the malfunction is located. Connect a diagnostic tool to the OBDII connector, usually located under the dashboard, and turn the ignition on without starting the engine. Enter the vehicle manufacturer, model, engine, and vehicle ID number into the diagnostic device to ensure accurate troubleshooting.
7. Consider Other Potential Issues: If the above steps do not identify the problem, consider other potential issues such as a bad alternator, clogged fuel filter, blown fuse, empty gas tank, immobilizer error, or any fault in the electrical system.

How to Fix 2020 Hyundai Venue Starting Problems– Step by step

To fix starting problems in a 2020 Hyundai Venue, follow these step-by-step instructions:

Step 1: Check the Battery

Ensure the battery is fully charged and in good condition. Use a multimeter to check the voltage; it should read around 12.6 volts when fully charged. Look for signs of corrosion on the terminals and clean them if necessary.

Step 2: Inspect the Starter Motor

Check the starter motor and its connections. A malfunctioning starter can prevent the engine from cranking.

Step 3: Examine Electrical Connections

Look for any loose or damaged wires that could cause intermittent issues, especially if the problem occurs sporadically as described in the first search result.

Step 4: Check the Key Fob Battery

Since the push start button sometimes does not respond, ensure the key fob battery is not depleted, as a weak battery can fail to send the proper signal to the car’s ignition system.

Step 5: Utilize Remote Start

If the push start button does not work, use the remote start feature on the key fob to start the vehicle, as suggested in the first search result. This can be a temporary solution while diagnosing other issues.

Step 6: Scan for Error Codes

Use an OBD-II scanner to check for any diagnostic trouble codes (DTCs) that could indicate specific issues with the vehicle’s starting system or other related components.

Step 7: Consult a Professional

If the above steps do not resolve the issue, it is advisable to consult a professional mechanic or a Hyundai service center. They can perform a more comprehensive diagnosis and address complex issues like a faulty ignition switch or problems with the car’s computer system.

Repairing 2020 Hyundai Venue Starting Problems: DIY or Professional Help?

When addressing starting problems with a 2020 Hyundai Venue, deciding between DIY repairs and seeking professional help depends on the complexity of the issue and your comfort level with car maintenance.

DIY Approach:

• Battery Issues: If the problem is a dead or weak battery, you might manage this yourself by performing a voltage test and possibly replacing the battery if needed.
• Corrosion on Battery Terminals: Cleaning corrosion from battery terminals is a straightforward task that can be done at home.
• Jump Starting: If the battery is dead, using jumper cables to start the car is a simple procedure.

Professional Help:

• Electrical Shorts and Wiring Issues: If the starting issue is due to electrical shorts or rodent damage to wiring, it’s advisable to consult a professional. These problems can be complex and require detailed knowledge of the vehicle’s electrical system.
• Starter or Alternator Problems: Replacing a starter or alternator can be challenging and might require specific tools and expertise. Professional mechanics can ensure these components are installed correctly and functioning properly.
• On-Board Diagnostics (OBD): While you can perform basic diagnostics using an OBD-II scanner, interpreting the codes and understanding deeper issues often require professional expertise.
• Intermittent Issues with Push Start Button: Such problems could be due to an underlying complex electrical issue that would be best diagnosed and repaired by a professional.

2020 Hyundai Venue Starting Problems Repairing Cost

The cost of repairing starting problems in a 2020 Hyundai Venue can vary depending on the specific issue and the required service. Here are some estimated costs for common repairs related to starting problems:

1. Battery Replacement: The cost of a battery replacement can vary. If you choose to replace the battery yourself, the cost of the battery alone is the primary expense. However, if you opt for professional installation, labor costs can add approximately $20-$40 to the service bill.
2. Starter Replacement: The cost for replacing the starter on a Hyundai Venue starts from $543, which includes both parts and labor.
3. Ignition Switch Replacement: Replacing the ignition switch can cost between $210 and $230 on average.
4. Fuel Pump Replacement: The cost for replacing the fuel pump can vary depending on location but generally involves significant labor and parts expenses.
5. General Diagnostic and Inspection: If the car will not turn over, a general inspection to diagnose the issue typically costs around $95. This inspection can help identify whether the problem lies with the battery, alternator, starter, or another component.

Preventing Future Starting Problems in 2020 Hyundai Venue

To prevent future starting problems in a 2020 Hyundai Venue, consider the following steps:

1. Regular Battery Maintenance: Ensure the battery is kept clean and the terminals are free of corrosion. Regularly check the battery’s voltage to ensure it is within the normal range (12 to 13 volts). If the battery is below 12.5 volts, recharge it immediately using a suitable smart battery charger.
2. Proactive Battery Testing: Have your battery tested frequently for extreme drops in voltage to make sure it’s operating at a reliable level. This is particularly important as the battery ages, typically around the 3 to 5-year mark.
3. Proper Storage: Keep your vehicle stored indoors away from extreme swings in temperature or climate. Extreme temperatures can affect battery performance and lifespan.
4. Regular Vehicle Use: Starting your Hyundai Venue consistently is crucial. Don’t let your battery go unused for long periods of time as this can lead to a loss of charge.
5. Secure Battery Installation: Ensure the battery is tightly fastened. Vibrations from your car can loosen the connections and rattle your battery’s components, potentially leading to internal damage.
6. Check Electrical Components: Regularly inspect other electrical components and connections for signs of wear or damage. This includes checking the starter, alternator, and any visible wiring for signs of corrosion or wear.
7. Follow Manufacturer’s Maintenance Schedule: Adhere to the Hyundai Venue’s maintenance schedule as outlined in the owner’s manual. This includes regular checks and replacements of the spark plugs, air filters, and other critical components that can affect starting.
8. Use of Genuine Parts: When replacements are necessary, use genuine Hyundai parts to ensure compatibility and reliability. This is especially important for components like batteries and alternators that directly affect the starting system.

Can I drive my 2020 Hyundai Venue with a malfunctioning Starting?

You can drive your 2020 Hyundai Venue with a malfunctioning starter depends on the severity of the issue. If the check engine light is flashing, it indicates a serious problem, and it is recommended not to drive the vehicle and seek service immediately. A flashing light typically signifies a critical issue that could cause significant damage to the engine or other components if not addressed promptly.

So, driving your Hyundai Venue with a malfunctioning starter is generally not recommended unless you are certain that the issue is minor and does not compromise the safety or operation of the vehicle.