By Justin - To change the windshield wipers on a Hyundai Elantra 2020, first, lift the wiper arms off the windshield.
- Press the small tab or release mechanism where the wiper blade connects to the arm, then slide the old wiper blade out.
- Align the new blade with the arm, and slide it in until it clicks into place. Ensure it's securely attached before lowering the arm back onto the windshield.
- Repeat for the other side. No special tools are required, but patience and care are essential to avoid damaging the windshield or wiper arms.
Gathering Necessary Tools
To change the windshield wipers on a 2020 Hyundai Elantra, gather these tools first:
- A flat-head screwdriver
- A tape measure or ruler
- Gloves
- A clean cloth or paper towels
Use the screwdriver to remove old wipers if they're stuck. Measure the old wipers to buy the right size replacements. Wear gloves to protect your hands from sharp metal parts. Use the cloth or towels to clean the windshield and wiper area before installing new wipers. Having these tools ready makes the wiper change easier and prevents problems.
Removing the Old Wipers
First, lift the wiper arms from the windshield of your 2020 Hyundai Elantra until they stay upright. Be careful to avoid damage.
Find the small tab or button where the wiper blade and arm connect. Press or slide this to release the wiper blade. You might need to gently move the blade to detach it. Be cautious to prevent the arm from snapping back.
After removing the blade, lower the arm to the windshield gently. Do the same for the other blade.
You have now removed the old wipers.
Selecting New Wiper Blades
To replace the old wipers on your 2020 Hyundai Elantra, you need to know the correct size. Usually, the Elantra needs a 26-inch blade for the driver's side and a 14-inch blade for the passenger side. Always check your car's manual or measure the old blades to be sure.
For new wiper blades, you have options. Rubber blades are common and cheap. Silicone blades last longer and work better in bad weather but cost more. Hybrid blades are a mix of both and could be a good option for your Elantra.
Make sure the new blades fit your Elantra's connector. Check the package for the right type of connector or for a list of compatible vehicles.
Installing New Wipers
To install new wipers on a 2020 Hyundai Elantra, follow these steps:
- Lift the wiper arms from the windshield. They lock to prevent snapping back.
- Remove old wipers.
- Align the new wiper blade with the arm. Match the hook on the arm with the adapter on the blade for a secure fit.
- Press the wiper blade into the arm's hook until it clicks, indicating it's attached.
- Carefully lower the wiper arm to the windshield to avoid damage.
- Do the same for the other wiper. Replace both for even performance.
Final Checks and Adjustments
Before you drive, make sure your new wipers are set up right and work well. First, lift each wiper arm from the windshield to check if they snap back properly. If they feel too loose or too tight, you might need to fix their installation.
Turn on your car and the wipers to watch how they move. They should move smoothly over the windshield. If they don't, turn off the car and adjust the wipers so they fit the windshield shape better.
Conclusion
You've just successfully changed the windshield wipers on your 2020 Hyundai Elantra. By getting the right tools, carefully taking off the old wipers, choosing the right new ones, and putting them on the right way, you've made sure you can see clearly while driving, which is safer.
Make sure to check at the end that they're on tight and working right. It's important to regularly check and change your wipers to keep driving safely.
Good job on completing this task.