How to Turn Off Reverse Beep on Hyundai Tucson?

How to Turn Off Reverse Beep on Hyundai Tucson? To turn off the reverse beep in a Hyundai Tucson, follow these two steps: press and hold the “ESC OFF” and “volume up” buttons simultaneously for three seconds. The reverse beep can be a convenient safety feature, but it can also be an annoyance, especially in certain situations.

How to Turn Off Reverse Beep on Hyundai Tucson

To turn off the reverse beep on a Hyundai Tucson, owners have shared various unofficial methods, as there is no standard feature or switch provided by Hyundai to disable the reverse beeping sound.

Here are some of the methods mentioned:

Tape Over the Speaker: Some owners have used tape to cover the speaker that emits the reverse beeping sound. This does not completely eliminate the noise but can significantly reduce its volume. Owners have used packing tape or black gorilla tape, applying two layers to muffle the sound while still allowing the vehicle to emit a quieter noise.

Disconnect the Speaker: A more technical approach involves disconnecting the speaker that produces the reverse beeping sound. This can be done by accessing the speaker from the front of the vehicle, behind the grill. However, this method is more complex and may involve removing parts of the vehicle’s front panel to reach the speaker’s connector. It’s important to note that this method may not be recommended as it involves altering the vehicle’s safety features.

Use a Rubber Pad: Another method is to apply a closed-cell rubber pad with adhesive on one side to the speaker. This can be done by cutting the pad to size, sliding it through the grill, and pressing it onto the speaker’s surface to reduce the volume to a more tolerable level.

The reverse beeping sound is a safety feature mandated by the National Highway Traffic Safety Administration (NHTSA) to alert pedestrians of the vehicle’s movement, especially since hybrid and electric vehicles can be very quiet when operating on electric power.

The Federal Motor Vehicle Safety Standard No. 141 requires these vehicles to make a noise when reversing and traveling forward below 18.6 mph, with a volume between 43 and 64 decibels.

Therefore, any modifications to this system should be considered carefully, and owners should be aware of the potential safety implications and legalities of disabling the reverse beep.

Why Turn Off Reverse Beep?

Owners of Hyundai Tucson and other Hyundai models have expressed a desire to turn off the reverse beep primarily due to its loud volume, which they find embarrassing and disruptive.

The reverse beeping sound, designed as a safety feature to alert pedestrians since the vehicle operates quietly, especially in hybrid or electric modes, has been reported to be excessively loud.

Owners are concerned about waking up neighbors or disturbing the peace, especially when reversing early in the morning or late at night.

Despite understanding the safety intent behind the feature, many find the specific noise chosen to be unpleasant and seek ways to mute or reduce its volume to avoid annoyance and maintain neighborhood harmony.

Step-by-Step Guide to Turning Off Reverse Beep

There is no official, manufacturer-approved method available through the vehicle’s settings menu to turn off the reverse beep feature in the Hyundai Tucson. Instead, owners have shared various unofficial methods to either muffle or disconnect the sound.

Here’s a summary of the steps based on those methods:

Muffling the Sound with Tape or a Rubber Pad:

• Locate the VESS (Virtual Engine Sound System) speaker, which is typically found in the front of the vehicle, behind the grill.
• Use packing tape, such as black gorilla tape, and apply two layers over the speaker to reduce the volume. This method maintains the sound inside the car but reduces it outside.
• Alternatively, use a closed-cell rubber pad with adhesive on one side. Cut the pad to size, slide it through the grill, and press it onto the speaker’s surface to muffle the sound.

Disconnecting the Speaker:

• The VESS speaker can also be disconnected to completely eliminate the reverse beep sound. This involves locating the speaker in the front of the vehicle, behind the grill.
• Access the speaker’s connector, which may require removing parts of the front panel or grill. Use tools like a hanger bent into shape and a dental mirror to depress the clip on the back of the connector and disconnect it.
• After disconnecting, check the vehicle for any error lights or warnings to ensure that other systems are not affected.