Hyundai P0014 Code Repair Cost, How To fix, Symptoms, Causes & Mistakes

Wondering about the cost of repairing a Hyundai P0014 code? Typically, you’re looking at a cost range of around $100 to $200 for diagnosing the code, but this can certainly go up or down depending on various factors.

Overview

What does Hyundai P0014 Code Mean?

The Hyundai P0014 code typically indicates a problem with the camshaft position, timing, or oil control valve. Besides, it can cause issues with engine performance.

Hyundai P0014 Code Repair Cost

Hey there! Are you experiencing the dreaded P0014 code in your Hyundai? Don’t panic, this code is common and can be fixed, but it’s important to know that the cost of diagnosis and repair may vary.

The average cost could be anywhere from $100 to $200. The costing depends on where you go for repairs, the complexity of the repair, and the local labor costs. So, it’s best to get an accurate quote from a trustworthy mechanic or dealership.

Keep in mind, though, that if any other issues arise during the diagnosis or if the repair needs are more extensive, then the cost may increase. Bottom line, get that quote and know exactly what you’re up against before making any decisions!

How to Diagnose and Repair Hyundai P0014 Code step by step

Diagnosing and repairing a Hyundai P0014 code can be done in the following steps:

Step 1 – Retrieve the code: The first step is to retrieve the P0014 code from the vehicle’s on-board diagnostics system using a code reader or scan tool.

Step 2 – Check for visible damage: Inspect the components related to the camshaft position for any visible signs of damage, such as cracks, leaks, or loose connections.

Step 3 – Check oil pressure: Verify that the engine oil pressure is within the proper specifications.

Step 4 – Inspect the VVT system: Inspect the Variable Valve Timing (VVT) system and related components, such as the VVT solenoid and oil control valve, for any signs of wear, damage, or failure.

Step 5 – Check oil control valve: Inspect the oil control valve for any signs of damage or clogging. Check the wiring connections to ensure they are tight and secure.

Step 6 – Check timing chain and sprockets: If the VVT system and related components appear to be functioning properly, inspect the timing chain and sprockets for any signs of wear or damage.

Step 7 – Replace damaged components: If any components are found to be damaged, replace them as necessary.

Step 8 – Clear the code: Finally, clear the P0014 code from the vehicle’s onboard diagnostics system and test drive the vehicle to verify that the code does not reappear.

Can I drive Hyundai with P0014 Code?

Yes, you can drive with Hyundai P0014 code. But it’s not recommended, let me describe why. Driving a Hyundai with a P0014 code can potentially cause further damage to the engine and decrease the vehicle’s performance.

But it is possible to drive the vehicle with the P0014 code. If the code is causing noticeable issues with the vehicle’s performance or drivability, it is best to have it towed to a repair facility for proper diagnosis and repair.

Possible Causes of the Hyundai P0014 Code

The Hyundai P0014 code is a generic powertrain code related to the camshaft position (CMP) timing. The code is stored when the engine control module (ECM) detects that the camshaft timing is not within the specified range. Some common causes of the P0014 code include:

Cause 1: A worn or damaged camshaft position actuator solenoid valve

Cause 2: A dirty or clogged oil control valve

Cause 3: Loose timing chain or belt

Cause 4: Incorrect engine oil viscosity or level

Cause 5: Engine control module (ECM) software issue

Cause 6: Wiring issues or connections problems in the camshaft position sensor circuit

Cause 7: Failed variable valve timing (VVT) system components

Cause 8: Engine mechanical problems, such as worn camshaft lobes or a damaged timing chain tensioner.

It is important to properly diagnose the P0014 code to determine the exact cause of the problem. A trained mechanic or dealership can perform the necessary diagnostics and repairs to resolve the issue.

Hyundai P0014 Code Possible Symptoms

The following are some common symptoms of a Hyundai P0014 code:

Symptoms 1: Illumination of the check engine light

Symptoms 2: Engine hesitation or stalling

Symptoms 3: Decreased engine performance

Symptoms 4: Poor fuel economy

Symptoms 5: Engine noise, such as a rattling or ticking sound

Symptoms 6: Engine rough idle

Symptoms 7: Engine misfires

Keep in mind that some vehicles may not exhibit any noticeable symptoms with a P0014 code, and the code may only be detected during routine maintenance or a check engine light diagnostic scan.

Tools Needed to Diagnose Hyundai P0014 Code

The following tools may be needed to diagnose a Hyundai P0014 code:

• OBD-II scanner to retrieve the code and any related freeze frame data
• Multimeter to test electrical connections and components
• Engine scope to inspect camshaft and crankshaft signals
• Fuel pressure gauge to check the fuel system pressure
• Vacuum gauge to check engine vacuum levels
• Engine compression tester to check engine compression levels
• Mechanical tools such as wrenches and sockets for removing parts for inspection or replacement

Note: The specific tools needed may vary based on the year, make, and model of the vehicle, as well as the specific cause of the P0014 code.

Hyundai P0014 code Common Diagnosis Mistakes

If you’re diagnosing a Hyundai P0014 code, don’t fall into these common pitfalls!

#Mistake 1 – Skipping over related codes: There could be other codes providing valuable information about the issue. Don’t miss out on them!

#Mistake 2 – Jumping straight to replacing parts: Before you start swapping out parts, make sure you’ve properly diagnosed the issue. Otherwise, you’ll be spending money for nothing!

#Mistake 3 – Forgetting about software issues: Sometimes, software glitches can be the root of the problem. Don’t overlook this possibility!

#Mistake 4 – Skipping a full inspection: A thorough check of the engine and its components is key to an accurate diagnosis. Don’t cut corners here!

#Mistake 5 – Not conducting proper tests: Testing is crucial to figuring out what’s causing the P0014 code. Don’t skip out on these essential steps.

Remember, these are just some common mistakes that people do and not all of them will apply in every situation. Make sure you’re well-equipped with the right training and experience before you tackle a P0014 code diagnosis.

Conclusion

The Hyundai P0014 code is a common issue that can cause problems with engine performance. Symptoms of the P0014 code may include engine misfires, rough idling, or decreased fuel efficiency. Causes can range from electrical or mechanical issues to problems with the oil pressure or viscosity. Mistakes to avoid include ignoring the issue or attempting to fix it without the proper knowledge or tools.

It is important to address the P0014 code promptly to ensure the continued performance and reliability of your Hyundai vehicle. I hope you find the article “Hyundai P0014 Code Repair Cost, How To fix, Symptoms, Causes & Mistakes” helpful.