Discover the easiest way to perform an oil change on your 2018 Hyundai Elantra. Follow our step-by-step guide for hassle-free maintenance.
Is your 2018 Hyundai Elantra running smoothly? It might be time to talk about oil changes. Regularly changing the engine oil and replacing the filter is essential for maintaining peak performance and extending the life of your vehicle. Neglecting these routine maintenance tasks can cause serious engine damage, leading to decreased fuel efficiency and costly repairs down the road. Don’t forget to schedule an appointment with the dealership service department to ensure your car’s sae standards are met. Additionally, it’s important to check the washer fluid regularly to keep your windshield clean and clear.
By adhering to the recommended maintenance schedule at your Hyundai dealership service department, you can ensure that your 2018 Hyundai Elantra with an i4 engine continues to provide optimal performance. Don’t underestimate the significance of timely oil changes for your engines. Trust us, it’s worth it! So let’s dive into why timely oil changes are crucial for your 2018 Hyundai Elantra’s well-being and how they can save you from unnecessary headaches in the future.
Take care of your car’s i4 engine, and it will take care of you. Let’s explore why regular oil changes are non-negotiable for engines. Visit your dealership service department for a washer change.
Engine Oil Capacity of the 2018 Hyundai Elantra
The engine oil capacity of the 2018 Hyundai Elantra is an essential factor to consider. Knowing the correct amount of oil to use during each change is crucial in order to prevent any potential issues such as overfilling or underfilling. It’s important to use the recommended amount of quarts for the engine. Additionally, using a floor jack can make the oil change process easier and more efficient. Don’t forget to also check and replace the washer to ensure a proper seal.
The recommended engine oil capacity for the 2018 Hyundai Elantra washer is approximately 4.5 quarts or 4.3 liters. It is important to note that this measurement may vary slightly depending on specific factors such as engine type and model variation. To ensure accuracy, it is always advisable to consult your owner’s manual or seek professional advice from a certified mechanic.
Maintaining the proper oil level in your vehicle is vital for optimal engine performance and protection against wear and tear. To ensure this, you need to know how many quarts of oil your engine requires. Overfilling can lead to excessive pressure within the engine, potentially causing leaks and other complications. On the other hand, underfilling can result in inadequate lubrication, leading to increased friction between moving parts and potential damage to your engine. To check the oil level, remove the cap and use the drain bolt. Remember to turn it counterclockwise.
To check if the oil level in your i4 engine is within the recommended range, follow these simple steps. First, locate the drain bolt on the engine. Next, remove the drain bolt to release the oil. Allow the oil to drain completely into a container, measuring in quarts. Once the oil has drained, replace the drain bolt securely. Finally, use a dipstick to check the oil level in the nu mpi engine.
- Park your vehicle on a leveled surface.
- Turn off the engine and wait for a few minutes for the oil to settle before removing the drain bolt.
- Locate the dipstick and drain bolt, usually labeled “Engine Oil” or “Oil Level,” which can be found near the front of your engine compartment.
- Remove the old oil filter, wipe it clean with a cloth or paper towel, then reinsert the dipstick fully into its tube.
- Remove the dipstick again and observe where the oil level reaches on its end. Make sure to check the level of the i4 engine oil using the dipstick.
- Ensure that the oil level falls within or close to the designated range indicated on the dipstick. Don’t forget to regularly change your oil filters and tighten the oil fill cap properly. Consider using an oil catch container to collect the old oil filter for proper disposal.
If your oil level is below the recommended range, you will need to add the appropriate amount of oil. Conversely, if it is above the recommended range, you may need to drain some oil until it reaches the desired level. It is crucial to use the correct engine oil type and viscosity as specified in your owner’s manual for optimal performance.
Type of Oil Required for a 2018 Hyundai Elantra
The type of oil you use in your 2018 Hyundai Elantra plays a crucial role in maintaining the performance and longevity of your engine. While there are several options available, it is essential to choose the right one to ensure optimal lubrication and protection.
Synthetic Blend or Fully Synthetic Oil with SAE 5W-20 Viscosity Grade
Synthetic blend or fully synthetic oils are highly recommended. These types of oils offer superior performance and protection compared to conventional oils. Synthetic blend oils combine both conventional and synthetic base oils, while fully synthetic oils are entirely man-made.
One crucial factor to consider when choosing oil is its viscosity grade, which indicates its flow characteristics at different temperatures. For the 2018 Hyundai Elantra, an oil with a viscosity grade of SAE 5W-20 is recommended. The “W” stands for winter, indicating that the oil has been designed to flow smoothly even in colder temperatures.
Using a synthetic blend or fully synthetic oil with an SAE 5W-20 viscosity grade ensures that your engine receives proper lubrication during startup when most wear occurs due to lack of initial lubrication. It also provides excellent protection against heat and friction under normal operating conditions.
Avoid Using Conventional Oils
While conventional oils may be less expensive than their synthetic counterparts, they may not provide sufficient performance and protection for your Hyundai Elantra’s engine. Conventional oils are derived from crude oil and undergo minimal refining processes compared to synthetic blends or fully synthetic oils.
Conventional oils tend to break down more quickly under high temperatures, leading to reduced lubrication capabilities. This can result in increased engine wear and decreased fuel efficiency. Conventional oils may not flow as smoothly in colder temperatures, leading to poor startup lubrication.
To ensure the longevity and optimal performance of your 2018 Hyundai Elantra, it is best to avoid using conventional oils. Instead, opt for synthetic blend or fully synthetic oils that have been specifically formulated to meet the demands of modern engines.
Step-by-Step Guide: Performing an Engine Oil Change on a Hyundai Elantra
Performing an engine oil change on your Hyundai Elantra is a simple task that can be done at home with basic tools. By following this step-by-step guide, you can complete the process accurately and ensure that no essential steps are missed. Not only will changing the engine oil yourself save you money on service costs, but it will also help keep your vehicle in top condition.
To begin the oil change process, gather the necessary tools and materials. You will need a socket wrench set, an oil filter wrench, a drain pan, a funnel, new engine oil (as recommended by your vehicle’s manufacturer), and a new oil filter.
- Park your Hyundai Elantra on level ground and engage the parking brake to ensure stability during the oil change.
- Locate the engine oil drain plug underneath the car. Place the drain pan beneath it to catch the old oil.
- Using a socket wrench, carefully loosen and remove the drain plug. Allow all of the old oil to drain into the pan completely.
- While waiting for all of the old oil to drain out, locate and remove the old oil filter using an appropriate-sized filter wrench. Be prepared for some residual oil to spill out when removing the filter.
- Before installing a new filter, apply a thin layer of fresh engine oil onto its rubber gasket to create a proper seal.
- Install the new oil filter by hand-tightening it until snug. Avoid over-tightening the oil filter, as it may cause leaks or difficulty during future removals.
- Once all of the old oil has drained from under your car, replace and tighten up the drain plug securely using your socket wrench.
- Now it’s time to add fresh engine oil through the designated fill cap located under your hood. Use a funnel to avoid spills or messes.
- Refer to your vehicle’s manual for the recommended oil type and capacity. Slowly pour in the new oil, checking the dipstick periodically to ensure you do not overfill.
- After adding the correct amount of oil, replace the fill cap tightly.
By following these simple steps, you have successfully performed an engine oil change on your Hyundai Elantra. Remember to properly dispose of the old oil at a local recycling center or an authorized dealership service department.
Regularly changing your engine oil is crucial for maintaining optimal performance and extending the life of your vehicle. By taking control of this maintenance task yourself, you can save money and have peace of mind knowing that your Hyundai Elantra is in good hands. So why wait? Get started with your DIY oil change today!
Step 1: Accessing the Engine Bay and Locating the Oil Drain Plug
To begin changing the oil in your 2018 Hyundai Elantra, you’ll need to access the engine bay and locate the oil drain plug. Follow these steps to get started:
- Open the hood of your Hyundai Elantra by pulling the release lever inside the vehicle. Locate the oil dipstick to check the oil level. To change the oil, first, remove the old oil filter and then use the oil drain bolt to drain the old oil. Finally, replace the old oil filter with a new one and add fresh oil.
- Once opened, secure the hood with the prop rod provided to keep it in place while you work on your vehicle. Don’t forget to locate and remove the oil drain bolt to drain the old oil from your vehicle. Also, make sure to replace the old oil filter with a new one and refill the engine with fresh oil.
Now that you have access to the engine bay, it’s time to locate the oil drain plug. This is an essential step as it allows you to drain out the old oil from your car’s engine before adding fresh oil. Here’s what you need to do:
- Get down on a comfortable mat or lie on a creeper board beneath your vehicle when changing the oil. Make sure to remove the old oil filter and loosen the oil drain bolt before installing the new oil.
- Look for a metal pan located at the bottom of your engine; this is called the oil pan.
- The oil drain plug is typically situated towards either the front or rear of this oil pan.
To make things easier, grab a flashlight and shine it under your car if needed to locate the old oil filter and oil drain bolt. The location may vary slightly depending on different models and engine configurations, but generally, it will be close to either end of the pan. Once located, remove the old oil filter and drain the old oil before replacing it with a new oil filter and adding fresh new oil.
Once you’ve identified the position of the old oil filter, take note of any obstacles that may hinder easy access like protective shields or components obstructing direct reach. Make sure to drain the old oil completely by removing the oil drain bolt. After that, replace the old oil filter with a new one and refill the engine with fresh oil.
To remove and drain out all of that old oil effectively, follow these steps:
- Position a catch pan directly underneath where you believe the new oil drain plug is located.
- Using a floor jack or drive ratchet with an appropriate socket size, carefully loosen and remove the new oil drain plug by turning it counterclockwise.
- As soon as it starts loosening up, be prepared for some residual pressure from within—oil may come out forcefully once fully unscrewed.
- Allow all the old oil to drain completely into the catch pan.
- While the oil is draining, take a moment to inspect the drain plug itself. If you notice any damage or excessive wear, it’s a good idea to replace it with a new one.
Congratulations! You’ve successfully accessed your Hyundai Elantra’s engine bay and located the oil drain plug. Now that all the old oil has been drained out, you’re ready to move on to the next step of changing your vehicle’s oil.
But before we proceed further with changing the oil, let’s ensure we’ve gathered all the necessary tools and materials, including the new oil and oil drain bolt.
- New oil filter
- Fresh engine oil (check your owner’s manual for specifications)
- Drain pan or catch pan
- Floor jack (if needed)
- Drive ratchet with appropriate socket sizes
- Oil filter wrench (if required)
With everything in place, let’s continue our journey towards giving your 2018 Hyundai Elantra a fresh start by replacing its engine oil.
Step 2: Draining the Old Oil and Removing the Oil Filter
To ensure your 2018 Hyundai Elantra continues to run smoothly, it’s important to regularly change the oil. This involves draining the old oil and replacing the oil filter. Let’s dive into the process step by step.
Draining the Old Oil
The first step in changing your car’s oil is to drain out the old oil. Start by locating the oil drain plug underneath your Hyundai Elantra. It is typically located on the bottom of the engine.
- Place a suitable container, such as an oil catch container, beneath the drain plug to collect the old oil.
- Using a wrench or ratchet, carefully loosen and remove the drain plug in a counterclockwise direction.
- Allow all of the old oil to fully empty into the container.
Remember, hot engine oil can cause burns, so exercise caution when removing the drain plug. It’s best to perform this task when your car has cooled down.
Removing and Replacing the Oil Filter
Once you have drained out all of the old oil, it’s time to remove and replace your Hyundai Elantra’s oil filter.
- Locate your car’s oil filter, which is typically situated near or above where you removed the drain plug.
- Using an appropriate tool like an oil filter wrench, carefully loosen and remove the old filter by turning it counterclockwise.
- Be prepared for some residual oil to spill out as you remove the filter; ensure that your container is ready to catch any drips.
- Before installing a new filter, make sure that you apply a thin layer of fresh motor oil onto its rubber gasket or seal.
- Install a new filter by twisting it on in a clockwise direction until it is snug but not overly tight; hand-tightening should be sufficient.
Remember to consult your owner’s manual or research the specific oil filter requirements for your 2018 Hyundai Elantra to ensure you purchase the correct replacement.
Proper Disposal
Properly disposing of used oil and filters is crucial for environmental safety. Never pour used oil down the drain or throw it in the trash. Here are some guidelines to follow:
- Take your used oil and filters to a local recycling center or an automotive service shop that accepts them.
- Many auto parts stores also offer used oil and filter recycling services.
- Ensure that you transport the used oil in a sealed container to prevent leaks or spills.
By following these steps, you can confidently change the oil and replace the filter in your 2018 Hyundai Elantra, ensuring optimal engine performance while also protecting the environment.
Step 3: Installing a New Oil Filter and Refilling with Fresh Engine Oil
Installing a new oil filter is an essential part of the oil change process for your 2018 Hyundai Elantra. It ensures that your engine receives clean, filtered oil for optimal performance. Here are some key points to keep in mind when replacing the oil filter:
- Lubricating the Rubber Gasket: Before installing the new oil filter, it’s important to lubricate its rubber gasket. This helps create a secure seal and prevents leaks. Apply a thin layer of fresh motor oil to the gasket using your finger or a clean cloth.
- Securing the Oil Filter: Once you’ve lubricated the gasket, carefully thread the new oil filter onto the engine block by hand. Make sure it’s tightened securely but avoid over-tightening, as this can damage both the filter and engine components.
Refilling your Hyundai Elantra’s engine with fresh engine oil is equally crucial after replacing the oil filter. Follow these steps to ensure a smooth refill process:
- Using a Funnel: To avoid spills or overfilling, it’s recommended to use a funnel when pouring fresh engine oil into your vehicle. The funnel helps direct the flow of oil into the filler opening without any mess.
- Checking Dipstick Levels: After refilling with new oil, it’s vital to check the dipstick to ensure you’ve added an adequate amount. Start by removing and wiping off any residual oil from the dipstick. Then reinsert it fully into its tube and pull it out again.Take note of where the level on the dipstick falls between “MIN” (minimum) and “MAX” (maximum) markings. If it’s below “MIN,” you’ll need to add more oil until it reaches an appropriate level.
By following these simple steps, you can confidently complete an oil change on your 2018 Hyundai Elantra. Remember to dispose of the used oil and filter properly, following local regulations or taking them to a designated recycling center.
Maintaining Optimal Performance with Regular Oil Changes in the Hyundai Elantra
Regular oil changes are essential for maintaining the optimal performance of your 2018 Hyundai Elantra. By following the recommended engine oil capacity and type, as well as a step-by-step guide for performing an oil change, you can ensure that your vehicle continues to run smoothly and efficiently.
The 2018 Hyundai Elantra has a specific engine oil capacity that should be adhered to for optimal performance. Using the correct amount of oil ensures proper lubrication and protection for the engine components, preventing excessive wear and tear.
In addition to the right quantity, it is crucial to use the appropriate type of oil for your Hyundai Elantra. The owner’s manual will provide information on which viscosity grade and specification are recommended by the manufacturer. By using high-quality engine oil that meets these specifications, you can enhance fuel efficiency and prolong the life of your vehicle’s engine.
Performing an engine oil change on your Hyundai Elantra is a relatively straightforward process when following a step-by-step guide. Accessing the engine bay and locating the oil drain plug is typically the first step. This allows you to safely drain out old, dirty oil from your vehicle.
Once drained, removing the old oil filter becomes necessary before installing a new one. A fresh filter ensures that contaminants are effectively removed from circulating engine oil, promoting cleaner operation.
After replacing the filter, it’s time to refill with fresh engine oil according to manufacturer recommendations. This step completes the process of an effective oil change in your 2018 Hyundai Elantra.
To maintain optimal performance in your vehicle, regularity in performing these steps is crucial. Following a routine maintenance schedule for changing your car’s engine oil helps prevent sludge buildup, maintains proper lubrication levels, and extends overall longevity.
By prioritizing regular maintenance such as consistent oil changes in your 2018 Hyundai Elantra, you can enjoy a smoother driving experience while potentially reducing the risk of costly repairs down the road.
FAQs
How often should I change the oil in my 2018 Hyundai Elantra?
It is recommended to change the oil in your 2018 Hyundai Elantra every 5,000 to 7,500 miles or every six months, whichever comes first. Regular oil changes help ensure optimal engine performance and longevity.
Can I use synthetic oil in my Hyundai Elantra?
Yes, synthetic oil is suitable for use in your Hyundai Elantra. In fact, many newer vehicles, including the 2018 model, are designed to perform optimally with synthetic oils due to their superior lubrication properties and resistance to breakdown under high temperatures.
What happens if I don’t change the oil regularly?
Failing to change your vehicle’s engine oil regularly can lead to a variety of issues. Over time, old oil becomes contaminated with dirt and debris, losing its ability to effectively lubricate vital engine components. This can result in increased friction and wear on parts, reduced fuel efficiency, and potential engine damage.
Can I change the oil myself or should I take it to a professional?
While changing your own oil is possible with some basic tools and knowledge, taking your vehicle to a professional service center ensures that the job is done correctly. Trained technicians have expertise in performing oil changes efficiently and can also inspect other areas of your vehicle during the process.
How do I dispose of used motor oil properly?
Used motor oil should never be disposed of by pouring it down drains or onto the ground. It is important to take used motor oil to an authorized recycling center or an automotive service facility that accepts used fluids for proper disposal. Many auto parts stores also offer recycling programs for used motor oil.